# @(#) $Revision: 1.3.212.1 $
#
# Standard configuration file for DTC Device File Access program.
#  Copyright (C) 1992 by HEWLETT-PACKARD.
#
#
#  This file contains the association between physical terminal server
#  ports and device file names.  A device name is used by the end-user
#  application to identify a port or access a remote port using a
#  device file access interface.
#
#
#  The remote identification is composed of a single IP address
#  (associated with a port) or an IP address (specifying the remote client)
#  and a board number/port number on that terminal server.
#
#  This file is used by the DDFA parser (/usr/sbin/dpp).
#
# The following format must be used:
#
#  IP_address   board/port   device_file_name   port_config_file   log_level
#
#  EX:
#  11.234.87.123   00/00   /dev/telnet/dtcportO0   /usr/examples/ddfa/pcf   3
#  11.234.87.123   00/01   /dev/telnet/dtcportI1   
#  11.234.87.124   XX/279  /dev/telnet/dtcportI1   /usr/examples/ddfa/pcf 
#  11.234.87.125   01/02   /dev/telnet/dtcportO2   /usr/examples/ddfa/pcf
# 
#  NOTE:
#
#   The device file should be placed into /dev/telnet, although such
#   placement is optional.
#
#   The logging level is optional with the entries for the DDFA purpose.
#
#   The first and third entries are used for the DDFA purpose.  The third
#   one is used for a PAD SUP accessing a PAD port through a DTC.
#
#   The fourth entry is used for the DDFA purpose on a DTC 16TN.  The
#   board number used is 1.
#
#   The second entry is used for the Telnet port identification feature.
#
#
#
