$
$ Message Catalog file for HP-UX Array Monitor daemon.
$ Copyright 1995 Hewlett-Packard Company
$
$ Message Set descriptions:
$
$ Set 1 is for the header message. This is the default set 
$ containing default messages used by the deamon monitor 
$ message conversion program. Do not change these default
$ values without also changing the deamon monitor message 
$ conversion program source.
$
$ Set 2 is for general and/or common daemon monitor messages.
$
$ Set 3 is for messages specific to the C2430D array.
$
$ Set 4 is for messages specific to the C3586A array family.
$
$ Set 5 is for messages specific to the arraymail script.
$
$ Set 16 is the version string.
$
$set 1
$ the header and date and name for all messages
1 \n! \n\
!Array Monitor Daemon \n\
!
$
2 array at !
$
$ Set 2 is for monitor daemon general messages.
$
$set 2
$ 
1 usage: arraymond \n\
arraymond at ! is aborting
$
2 cannot start array monitor daemon at !: \n\
another instance is already running
$
3 format error: !\n\
at ! has bad format
$
4 device list error: ! at ! \n\
is missing. Run arrayscan to create it.
$
5 lock error: Unable to lock ! at !.
$
6 access error: Unable to get status from disk array\n\
on ! at !
$
7 internal error detected in array status routine for\n\
! disk array at !. arraymond aborting 
$
8 lock error: ! at ! is missing.
$
9 lock error: checklock returned an\n\
unexpected error on !
$
10 lock error: checklock could\n\
not open ! on !
$
$ Set 3 is for C2430D error messages.
$
$set 3
1 disk error on ! at !.
$
2 channel '!' ID '!' FAILED.
$
3 channel '!' ID '!' WARNING.
$
4 channel '!' ID '!' PARM MISMATCH.
$
5 channel '!' ID '!' WRONG DISK REPLACED.
$
6 sync configuration error on ! at !.
$
7 disk at channel '!' ID '!' : UNSYNC not in sync.
$
8 disk at channel '!' ID '!' : SLAVE in sync.
$
9 disk at channel '!' ID '!' : SLAVE not in sync.
$
10 disk at channel '!' ID '!' : MASTER CONTROL in sync.
$
11 disk at channel '!' ID '!' : MASTER CONTROL not in sync.
$
12 disk at channel '!' ID '!' : MASTER in sync.
$
13 disk at channel '!' ID '!' : MASTER not in sync.
$
14 sync loss error on ! at !.
$
15 disk on channel '!' ID '!' has been out of sync for ! minutes.
$
$ Set 4 is for C3586A error messages.
$
$set 4
$
1 Not enough disks have been added on \n\
! at ! for the disk array to function.
$
2 No Quorum of disks exists for disk array\n\
on ! at !.
$
3 No address table exists for disk array\n\
on ! at !.
$
4 Disk array on ! at ! is shutting down.
$
5 Disk array on ! at ! is shut down.
$
6 Disk array on ! at !\n\
has no MicroCode.
$
7 Disk array on ! at !\n\
returned unrecognizable error code.
$
8 Disk array on ! at !\n\
is in a warning state. Additional status was unavailable.
$
9 Disk array on ! at !\n\
failed shut down.
$
10 Disk array on ! at ! has \n\
mis-matched firmware on controller X and Y.
$
20 Data on disk array on !\n\
at ! is unavailable.
$
21 Data redundancy has been lost in disk array \n\
on ! at !.
$
22 Active hot sparing is not enabled for disk\n\
array on ! at !.
$
23 Disk error in disk array on !\n\
at !.
$
24 Unwritten space on ! \n\
at ! is becoming depleted.
$
25 Rebuild operation for disk array on\n\
! at ! failed.
$
26 Activity log for disk array\n\
on ! at ! is full.
$
27 Disk array on ! at !\n\
returned unrecognizable warning.
$
28 Active hot spare warning on ! at !.\n\
Unallocated space is too small for active hot spare.
$
29 Disk array on ! at !\n\
has an unused simm.
$
30 Disk array on ! at !\n\
has disabled the array controller in slot '!'.
$
31 Disk array on ! at !\n\
has failed to mirror Ram images between array controllers.
$
32 Disk array on ! at !\n\
is processing a hot plug event. Do not remove another\n\
disk until the array has finished processing the event.
$
40 Battery problem has been detected for disk array \n\
on ! at !.
$
41 Battery on controller '!' has failed.
$
42 Battery on controller '!' is depleted.
$
43 Battery status on controller '!' is unknown.
$
50 Fan problem has been detected for disk array \n\
on ! at !.
$
51 Fan in slot 'F!' has failed.
$
52 Fan in slot 'F!' is missing.
$
53 Fan status for slot 'F!' cannot be determined.
$
60 Power supply problem has been detected for disk array \n\
on ! at !.
$
61 Power supply in slot 'P!' has failed.
$
62 Power supply in slot 'P!' is missing.
$
63 Power supply status for slot 'P!' cannot be determined.
$
70 Controller problem has been detected for disk array \n\
on ! at !.
$
71 Controller '!' has failed.
$
72 Controller '!' is not present.
$
73 Controller '!' status cannot be determined.
$
80 NVRAM error has been detected for disk array \n\
on ! at !.
$
81 NVRAM in position '!' on controller '!' has failed.
$
82 NVRAM in position '!' on controller '!' is missing.
$
83 NVRAM status for position '!' \n\
on controller '!' cannot be determined.
$
90 DRAM error has been detected for disk array \n\
on ! at !.
$
91 DRAM in position '!' on controller '!' has failed.
$
92 DRAM for position '!' on controller '!' is missing.
$
93 DRAM status for position '!' \n\
on controller '!' cannot be determined.
$
100 Disk in slot '!' is \n\
not included in the array.
$
101 Disk in slot '!' has been downed.
$
102 Disk in slot '!' has failed.
$
103 Disk in slot '!' was \n\
previously used in another array.
$
104 Disk in slot '!' is \n\
not a supported disk.
$
105 Disk in slot '!' failed initialization \n\
by the disk array controller.
$
110 Disk missing in disk array on !\n\
at !.
$
111 Disk "!" serial number !\n\
is reported missing by the disk array.
$
120 Attempt to retrieve additional error information\n\
for disk array on ! at ! was unsuccessful.
$
121 access error: autoraid server timed out getting\n\
disk array status on ! at !
$
$ Set 5 is for arraymail messages
$
$set 5
$
1 Attempt to cat error notification to !\n\
at ! FAILED. Message was:
$
2 usage: arraymail <mail flag> <error message file> [destinations]
$
$set 16 - Message Catalog Version
$
1 A.00.01
$
