Patch Name: PHKL_21420

Patch Description: s700_800 11.00 diag2 must be MP-safe

Creation Date: 00/03/29

Post Date: 00/04/05

Hardware Platforms - OS Releases:
	s700: 11.00
	s800: 11.00

Products: N/A

Filesets:
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP

Automatic Reboot?: Yes

Status: General Release

Critical: No

Category Tags:
	defect_repair hardware_enablement general_release

Path Name: /hp-ux_patches/s700_800/11.X/PHKL_21420

Symptoms:
	PHKL_21420:
	( SR: 8606108263 CHART: JAGab78658 )
	When running the STM CPU information module, a similar
	message to the one below is logged into
	/etc/adm/syslog/syslog.log:

	mpc_bindlwp: Migrating process 3269 from processor 30 to
	processor 0!
	mpc_bindlwp: Overriding conflicting mandatory binding!

Defect Description:
	PHKL_21420:
	( SR: 8606108263 CHART: JAGab78658 )
	Diag2 has been MP safe, but the flag DRV_MP_SAFE was not
	being set to indicate so.

	Resolution:
	Added DRV_MP_SAFE flag to declare diag2 as mp-safe.

SR:
	8606108263

Patch Files:
	
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP:
	/usr/conf/lib/libhp-ux.a(diag2.o)

	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP:
	/usr/conf/lib/libhp-ux.a(diag2.o)

what(1) Output:
	
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP:
	/usr/conf/lib/libhp-ux.a(diag2.o):
		diag2.c $Date: 2000/03/27 11:28:14 $Revision: r11ros
			/7 PATCH_11.00 (PHKL_21420)

	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP:
	/usr/conf/lib/libhp-ux.a(diag2.o):
		diag2.c $Date: 2000/03/27 11:28:14 $Revision: r11ros
			/7 PATCH_11.00 (PHKL_21420)

cksum(1) Output:
	
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP:
	601664012 14668 /usr/conf/lib/libhp-ux.a(diag2.o)

	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP:
	680362572 38776 /usr/conf/lib/libhp-ux.a(diag2.o)

Patch Conflicts: None

Patch Dependencies:
	s700: 11.00: PHKL_18543
	s800: 11.00: PHKL_18543

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches: None

Patch Package Size: 80 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_21420

	5. Run swinstall to install the patch:

		swinstall -x autoreboot=true -x patch_match_target=true \
			  -s /tmp/PHKL_21420.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/save/PHKL_21420.  If you do not wish to retain a
	copy of the original software, use the patch_save_files option:

		swinstall -x autoreboot=true -x patch_match_target=true \
			  -x patch_save_files=false -s /tmp/PHKL_21420.depot

	WARNING: If patch_save_files is false when a patch is installed,
		 the patch cannot be deinstalled.  Please be careful
		 when using this feature.

	For future reference, the contents of the PHKL_21420.text file is 
	available in the product readme:

		swlist -l product -a readme -d @ /tmp/PHKL_21420.depot

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_21420.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	This patch depends on base patch PHKL_18543.
	For successful installation please insure that PHKL_18543
	is already installed, or that PHKL_18543 is included
	in the same depot with this patch and PHKL_18543
	is selected for installation.

