Patch Name: PHKL_20016

Patch Description: s700_800 11.00 2nd CPU not recognized in G70/H70/I70

Creation Date: 99/09/28

Post Date: 99/10/04

Hardware Platforms - OS Releases:
	s700: 11.00
	s800: 11.00

Products: N/A

Filesets:
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP

Automatic Reboot?: Yes

Status: General Release

Critical: No

Category Tags:
	defect_repair general_release

Path Name: /hp-ux_patches/s700_800/11.X/PHKL_20016

Symptoms:
	PHKL_20016:
	On dual processor G70, H70, and I70 systems, after
	installing patch PHKL_18543, the following error messages
	are displayed during boot:

	Line 190 in /ux/core/kern/io/mod_object.c:
	cb_insert_module - mod 0x00626ea0 entry 0x00626e60
	hw 0x00550240

	Line 1557 in /ux/core/kern/io/pa_legacy_psm.c: pa_scan -
	could not insert PA module: 0x

	After the system is up, ioscan shows only one processor.

Defect Description:
	PHKL_20016:
	Only one of the two processors of a G70, H70, or I70 system
	is installed after patch PHKL_18543 is installed.  The
	seconnd CPU is missing.  This can be verified either by
	ioscan or q4.  This is caused by the fact that
	cb_insert_mulde is not aware of PCXT-HYDRA processor board.

	Resolution: added code to cb_insert_mulde to properly
	handle the PCXT-HYDRA processor board.

SR:
	8606103256

Patch Files:
	
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP:
	/usr/conf/lib/libhp-ux.a(mod_object.o)

	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP:
	/usr/conf/lib/libhp-ux.a(mod_object.o)

what(1) Output:
	
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP:
	/usr/conf/lib/libhp-ux.a(mod_object.o):
		mod_object.c $Date: 1999/09/24 17:21:21 $Revision: r
			11ros/2 PATCH_11.00 (PHKL_20016)

	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP:
	/usr/conf/lib/libhp-ux.a(mod_object.o):
		mod_object.c $Date: 1999/09/24 17:21:21 $Revision: r
			11ros/2 PATCH_11.00 (PHKL_20016)

cksum(1) Output:
	
	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_32,v=HP:
	1414926281 6164 /usr/conf/lib/libhp-ux.a(mod_object.o)

	OS-Core.CORE2-KRN,fr=B.11.00,fa=HP-UX_B.11.00_64,v=HP:
	2105992260 14536 /usr/conf/lib/libhp-ux.a(mod_object.o)

Patch Conflicts: None

Patch Dependencies:
	s700: 11.00: PHKL_18543
	s800: 11.00: PHKL_18543

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches: None

Patch Package Size: 50 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_20016

	5. Run swinstall to install the patch:

		swinstall -x autoreboot=true -x patch_match_target=true \
			  -s /tmp/PHKL_20016.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/save/PHKL_20016.  If you do not wish to retain a
	copy of the original software, use the patch_save_files option:

		swinstall -x autoreboot=true -x patch_match_target=true \
			  -x patch_save_files=false -s /tmp/PHKL_20016.depot

	WARNING: If patch_save_files is false when a patch is installed,
		 the patch cannot be deinstalled.  Please be careful
		 when using this feature.

	For future reference, the contents of the PHKL_20016.text file is 
	available in the product readme:

		swlist -l product -a readme -d @ /tmp/PHKL_20016.depot

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_20016.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	This patch depends on base patch PHKL_18543.
	For successful installation please insure that PHKL_18543
	is already installed, or that PHKL_18543 is included
	in the same depot with this patch and PHKL_18543
	is selected for installation.

